G11S Series

• An excellent starting torque of 200% at 0.5Hz is realized by employing Fuji Electric's unique torque vector control system.
• An automatic-tuning function and other intelligent and convenient functions are incorporated.
• Inverters are compact and totally enclosed (models up to 22kW), in a wide variation from 0.2 to 400kW.

 

P11S Series

(Low-noise inverters for fans and pumps)

• These inverters are specially designed for variable torque loads, such as fans and pumps.
• An automatic energy-saving function is included for simple energy-saving operation.
• An interactive keypad panel is incorporated as standard equipment, allowing you to operate the inverter without a manual.

Input Voltage and Product Range

Rated AC input voltage

Nominal input voltage	Capacity	AC input voltage and frequency
3-phase 200V	22kW or less	200 to 230V 50/60Hz
	30kW or more	200 to 220V 50Hz 220 to 230V 50Hz __(Order individually) 200 to 230V 60Hz
3-phase 400V	22kW or less	380 to 480V 50/60Hz
	30kW or more	380 to 440V 50Hz 380 to 480V 60Hz

Allowable variation

Voltage	+10% to -15%
Frequency	+5% to -5%
Imbalance rate in power supply voltage	2% or less (Conforms to IEC61800-3(5.2.3))

Product range

G11 Series

__3-phase 200V: 0.2 to 90kW

__3-phase 400V: 0.4 to 400kW

P11 Series

__3-phase 200V: 5.5 to 110kW

__3-phase 400V: 5.5 to 500kW

Output Frequency Range

G11S: 0.1 to 400Hz
P11S: 0.1 to 120Hz

General Specifications

Series		Frenic5000G11S	Frenic5000P11S
Output overload capability		200% of rated current for 0.5s 150% of rated current for 1min	110% of rated current for 1min
Braking torque	Regenerative braking	150% or more at 3% ED __(0.75kW or less) 100% or more at 5 to 2% ED __(1.5 to 7.5kW or less) 20% or more __(11 to 22kW) 10 to 15% __(30kW or more)	20% or more __(11 to 22kW) 10 to 15% __(30kW or more)
	DC injection braking	Starting frequency: 0.1 to 60Hz (adjustable) Braking time: 0 to 30s (adjustable) Braking voltage: 0 to 100% (adjustable)
Acceleration/deceleration time		0.01 to 3600s (Acceleration/deceleration can be set independently)
Multi frequency control		16 steps
Frequency setting signal		0 to ± 5V DC, 0 to ± 10V DC, 4 to 20mA
Protective functions		Stall prevention, overcurrent, instantaneous power failure or undervoltage, overvoltage, inverter overheating, external alarm (tripping of external thermal overload relay), motor overload (tripping of electronic thermal overload), communications error, CPU error, memory error, short-circuit, ground fault, blown out fuse, input open-phase protection, output open-phase protection
Alarm relay output		SPDT contact
Enclosure and cooling method		Totally enclosed natural cooling type [IP40] __(0.75kW or less) Totally enclosed fan cooling type [IP40, except fan] __(1.5 to 2.2kW) Fan cooling type [IP00] __(30kW or more) For inverters of 30kW or more, the totally enclosed type [IP20] is optional.	Totally enclosed fan cooling type [IP40, except fan] __(5.5 to 22kW) Fan cooling type [IP00] __(30kW or more) For inverters of 30kW or more, the totally enclosed type [IP20] is optional.